Category Archives: Wetrooms

Impey wet rooms

CHOOSING IMPEY WET ROOMS More Information on BUY IMPEY WETROOMS Simply choose the correct Impey wet rooms, drainage option and Tilesafe® kit for your wet rooms.

Impey aquadec

Impey Wet rooms Timber Floor Installation

Installation Step 1
Remove the bathroom floor boards to the size of the Impey Aqua-Dec.

Installation Step 2
Ensure the Dec is level on all four sides. It may be necessary to fit noggins and a solid base for additional support.

Installation Step 3
Fit the shower trap to the waste pipe and align with the aperture in the Impey Aqua-Dec.

Installation Step 4
Put the Aqua-Dec back into place. Check the aperture aligns with the shower trap and check the Aqua-Dec is level on all sides.

Installation Step 5
Fix the Aqua-Dec to the bathroom sub floor using the screws provided.

Installation Step 6
Fit the base component of the shower gully to the Dec and connect to the bathroom shower trap.

Installation Step 7
Waterproof the bathrooms showering area by installing the Impey Tilesafe® membrane.

Installation Step 8
The area is now ready to be tiled and your wet room is complete!

Impey wet room: Installation on a timber floor

THE IMPEY WET ROOMS SYSTEM SUITS BOTH TIMBER AND CONCRETE BATHROOM FLOORS TIMBER FLOOR IN BATHROOMS WITH TILED SURFACE
Concrete floor
The Impey Aqua-Dec, being 22mm thick is ideal for most timber floor wet rooms installations. To fit the Aqua-Dec the floor boards are removed. When the drainage and the pipe work have been installed the Aqua-Dec can then be permanently fixed to the joists. The remaining floor must finish level with the Aqua-Decs edges in preparation for the floor tiles.

 

CONCRETE BATHROOM FLOOR WITH TILED SURFACE
Timber floorOn concrete floors the Aqua-Dec can be let into the concrete screed and when the pipe work has been completed it can then be bedded down to sit level with the existing floor which must finish level with the Aqua-Decs edges in preparation for the floor tiles.

 

TIMBER BATHROOM FLOOR WITH VINYL COVERING
Timber floorThe Aqua-Dec being 22mm thick is ideal for most timber floor situations. To fit the dec the floor boards are removed. When the drainage and the pipe work have been installed the dec can then be permanently fixed to the joists. The remaining floor must finish level with the Aqua-Decs edges in preparation for the slip resistant floor covering.

 

CONCRETE BATHROOM FLOOR WITH VINYL COVERING
Concrete floorOn concrete floors the Aqua-Dec can be let into the concrete screed and when the pipe work has been completed it can then be bedded down to sit level with the existing floor in preparation for the slip resistant floor covering.

 

waterproofing wetrooms

PEACE OF MIND WITH THE IMPEY TILESAFE TANKING MEMBRANE

When you are waterproofing a shower or wet rooms area quickly and safely Impey have the answer. The Impey Tilesafe® Wet rooms Membrane is a cold-applied, self-adhesive, waterproof membrane which consists of a thick rubberised waterproof layer; incorporating a woven glass fibre mesh on one side.
Impey developed this for use prior to the application of ceramic tiles which are applied using a flexible adhesive which keys to the mesh. As the adhesive dries it forms a strong permanent bond through the mesh and directly onto the waterproofing layer. Impey Tilesafe® can be fixed to ply, masonry, concrete or plasterboard to form a secure internal watertight wet rooms structure. And because there is no curing time you can tile the same day.
It is advised that Tilesafe® be applied to the entire floor area. Tilesafe® is only suitable for tiled floors and cannot be used with vinyl flooring,

THE IMPEY WET ROOMS BENEFITS:

  • Cost effective tanking solution
  • Quick and easy to apply
  • Simple to detail in critical areas
  • Ideal for suspended timber floors
  • Flexible movement in substrates
  • Compatible with all quality adhesives
  • Lifetime guarantee (conditions apply)

Impey drains

In many contemporary bathrooms, showers and wet rooms a gravity drain is not a feasible option. In a loft conversion, where room height is constrained, or in a basement where the waste water outlet is higher than the gully, an alternative system is required. Impey's Dry-Deck 20 provides the solution. This low voltage pump system is quiet, compact and can be concealed so as not to compromise the rooms aesthetics. It provides a reliable solution Dry deck pumprequiring no regular maintenance.
Features and Benefits
• The flow rate of the Dry-Deck 20 system adjusts to changes in shower flow rate
• Almost silent when running
• No filter in waste system - no cleaning required
• Valves integral to the pump prevent odours escaping from the drainage pipe
• Maximum flow rate 20 Itr/min
• Capable of pumping up to the ground floor waste outlet, ideal for basement installations
• 2 year warranty

IMPEY WET ROOMS CONTROL UNIT
The unit initiates the start-up of the pump, regulates the flow rate and controls the pump shut down.

 

IMPEY WET ROOMS DRY DECK PUMP
A quiet running waste pump designed to pump up to 20 litres per minute enabling wet rooms to be installed where it would otherwise not be possible.

IMPEY WET ROOMS FLOW SENSOR
Monitors the water flow through hot and cold pipes and transmits a signal to the control unit.

To be sure of maximising the effectiveness of your installation use the best materials available from Impey the Wet rooms specialist.

THE IMPEY TILESAFE KIT IN TWO SIZES:

IOM2 KIT, ORDER CODE TSI INCLUDES:

  • 10m2 of Tilesafe® membrane
  • Tilesafe® primer
  • Reinforcing tape
  • Jointing compound
  • Putty

5M2 KIT. ORDER CODE TS2 INCLUDES:

  • 5m2 of Tilesafe® membrane
  • Tilesafe® primer
  • Reinforcing tape
  • Jointing compound
  • Putty